Monodraught Systems

Ridgeline Systems

Based on the well proven Monodraught principle of providing all the air requirements for combustion and ventilation from the roof level system, the Ridge Terminal design provides Architects with a neat and unobtrusive termination, but at the same time provides the correct conditions for optimum boiler efficiency. Most systems are manufactured to fit nearly between roof trusses but all systems are purpose made to fit the roof construction, depending on flue size and total boiler output.

Turret Systems

There are a wide range of standard styles and turrets available. These Architectural feature Turrets provide a striking termination to any flue system and are produced as open or closed top systems, all operating on the vertical balanced-flue principle.

Open Top Turret systems can incorporate a stove enameled rain cap or where a drain point can be provided at the base of the main flue, the Monodraught 'mesh' grill top can be specified.

Classic Turret systems operate on the same principle as a domestic balanced-flue arrangement, with the internal flue terminating in a 'cross box'. Therefore whichever way the wind blows, the products of combustion can be safely discharged without any restriction to the flue gas flow.

Weathervanes are available in a wide range of styles or finials can be provided. Further information is available from our technical department.

Clad Systems

For listed buildings, brick, slate or stone cladding can be added to the standard Monodraught arrangement with the internal balanced-flue system in GRP.

Special oversize stone cappings can be provided together with clay chimney pots, alternatively brick-on-edge capping and corbel courses can be incorporated in the final design providing the essential air intakes are maintained.

Special Shapes and Finishes

Monodraught take great pride in being able to manufacture systems to any size, shape or colour to suit any building feature. Whether it be a high tech building or a listed building that is very sensitive to planning restrictions, Monodraught produce systems that are sympathetic to the Architects requirements.

One off and bespoke systems can be produced to add the finishing touch to any project because all systems are manufactured in GRP. Monodraught systems are used extensively in conservation areas where tall unsightly conventional flueing arrangement would not be welcome.

Systems can be manufactured to a very low profile to hide the termination or they can be designed to be the main feature of the building. There is virtually no limit to what we can provide and we always relish a new challenge.